How Much Does a Bathroom Renovation Cost? Realistic Budget Ranges for Albury-Wodonga Homes
Bathroom renovation cost depends on the existing layout, the condition of the room and the finishes you choose. The cost of
bathroom renovations in Albury can vary considerably, so start by setting priorities and understanding what your budget needs to cover.
The Short Answer: What Does a New Bathroom Cost in Albury-Wodonga?
As a broad guide, a basic renovation may sit in the $5,000–$15,000 range, a mid-range project in the $15,000–$35,000 range, and a high-end renovation at $35,000+. These figures come from the existing budget guide and are not a quote. Your bathroom renovation cost will depend on the scope, the home’s condition, whether you change the layout and the fixtures and finishes you select.
Before settling on a bathroom budget, decide what needs to improve and which features matter most. Allow for both visible finishes and less visible work, and make key selections early so you can compare quotes against the same scope. The ranges below are a starting point for planning a bathroom renovation cost in Australia; the final requirements depend on the individual property.
How Different Budget Ranges Compare
These broad ranges indicate the type of work that may be included. The actual scope can vary with the bathroom’s size, condition and specifications.
| Budget Range | Approximate Cost | What It Typically Includes |
|---|---|---|
| Basic Renovation | $5,000 – $15,000 | Like-for-like replacement of fixtures and fittings with standard finishes using the existing layout |
| Mid-Range Renovation | $15,000 – $35,000 | Full strip-out with updated finishes and moderate upgrades |
| High-End Renovation | $35,000+ | Structural changes, premium finishes and custom inclusions |
Use the table to frame an early discussion, not as a fixed price. At McGrath Builders & Associates, every quote is personalised to the home and the work required.
Why Does Moving the Plumbing Change the Cost So Much?
Moving a vanity or shower to another wall often pushes a job into the next budget tier because the pipework and drainage need to move too. This can involve opening walls or floors, rerouting supply lines and waste pipes, then repairing and finishing the affected areas. Keeping fixtures near their existing positions can leave more of the budget for storage, fittings and finishes.
In older Albury homes, ageing supply and drainage lines may only be visible once walls or floors are opened. Discuss plumbing requirements before settling on a new layout, particularly if the bathroom has a history of leaks or repairs.
Which Finishes and Fixtures Push the Budget Up Fastest?
The materials you choose can shift the budget quickly. Set allowances early and compare products against the scope of the whole renovation. These tiers show where selections may sit:
- Entry-level tiles and tapware
- Mid-range vanities and fittings
- Custom cabinetry and bespoke inclusions
- Luxury additions such as heated flooring or frameless screens
- Premium tapware and designer fixtures
Custom cabinetry, frameless screens and heated flooring can add to the project scope, while premium tiles and tapware can increase the materials allowance. Choose the features that matter most to how you use the room, then balance them with practical options elsewhere.
Where Should You Spend and Where Can You Save?
Prioritise work that protects the bathroom and supports daily use. These elements are harder to revisit once the finishes are installed:
- Waterproofing systems
- Plumbing and drainage work
- Ventilation and extraction
- Professional tiling installation
- Durable fittings and fixtures
Keeping the existing layout is often the clearest way to contain costs, as it may avoid extensive plumbing and drainage changes. You can also compare standard and custom cabinetry, limit statement finishes to a few areas and keep the rest of the palette simple. Avoid cutting back on essential preparation or concealed work without understanding what that change means for the finished room.
Is Resurfacing a Cheaper Alternative to a Full Renovation?
Resurfacing coats or renews an existing surface; it does not repair what is underneath. It cannot fix a failed waterproofing membrane, a rotting subfloor or leaking pipework. Leaks hidden behind tiles are among the common plumbing issues during bathroom renovations that resurfacing may simply cover up.
A full renovation is more likely to be needed if tiles sound hollow or feel loose, skirting boards are swelling, mould appears at the base of walls, or water stains show in an adjoining room. Resurfacing may suit a short-term cosmetic update before a sale or lease if the tiles are sound and there are no signs of leaks.
If you’re wondering, “Can you paint bathroom tiles?”, consider the condition of the surface first. A coating can change the appearance, but it does not replace repairs where moisture or movement is present.
How Much Contingency Should You Allow?
Allow a 10 to 15% contingency for unforeseen work. It is a planning buffer, not a figure you are certain to spend. In established Albury homes, ageing supply and drainage lines or hidden damage may only become apparent after demolition. Pipework relocation can also become necessary when walls are opened and the existing lines are assessed.
Ask how extra work will be identified, quoted and approved before construction begins. Our guide on
what causes budget blowouts covers how hidden conditions and late changes can affect a project.
What Should Be Itemised in Your Quote?
Ask for the quote to list demolition, disposal, waterproofing, electrical work and plumbing separately. It should also clarify the fixtures, finishes and cabinetry allowances, plus any exclusions or work that depends on what is uncovered once surfaces are removed. Clear itemisation helps you understand what is included and compare quotes on a like-for-like basis.
At McGrath Builders & Associates, each quote is personalised to the home, design and work required. We have more than 30 years of experience building and renovating established Albury homes, and we’re fully licensed and insured. For more guidance, see
what to check before hiring a bathroom builder.
Get a Personalised Quote for Your Bathroom
A realistic budget starts with a clear scope, considered priorities and a contingency for what an older home may reveal. We can discuss your layout, finishes and project requirements, then prepare a personalised quote. If you're considering bathroom renovations in Albury,
contact us or call Brendon on 0418 485 336 to talk through your plans.
FAQs
How much contingency should I allow for an older home?
Allow 10 to 15% as a planning buffer. Older pipes or hidden damage may only become visible once walls or floors are opened, so the amount used will depend on what the work uncovers.
Can I keep costs down by keeping the same layout?
Often, yes. Keeping the vanity, shower and toilet near their existing positions can reduce plumbing and drainage changes. The condition of the existing pipes and surfaces still needs to be assessed.
Can you paint bathroom tiles instead of replacing them?
Tile coatings can refresh sound surfaces, but they won’t repair loose tiles, leaks or failed waterproofing. Have signs of moisture damage or movement assessed before choosing a cosmetic treatment.
Does a bathroom quote include waterproofing and plumbing?
The quote should state whether waterproofing and plumbing are included and describe the scope. Ask for these, along with demolition, disposal and electrical work, to be clearly listed.







